BUILDMIX SNF

High performance super plasticizing admixture. BUILDMIX SNF complies with IS: 9103:1999 and BS:5075 Part 3. BUILDMIX SNF conforms to ASTM-C-494 Type 'G'.

Typical Uses:

To produce pumpable concrete to obtain high strength by substantial reduction in water resulting in low permeability and high early strength.

Dosage:

0.5-1.5 liters/100 kg of total cementitious material.

BUILDMIX AΕΑ

Air entraining admixture. BUILDMIX AEA complies with BS 5075 Part 2, BS 4887 Part 1, ASTM C260.

Typical Uses:

To produce air entrained concrete for increased durability and resistance to damage by frost and deicing salts. Typical applications include concrete roads and concrete dams, airport runways and taxiways and other extensive areas of concrete exposed to potential frost damage.

Dosage:

0.08 litres/100 kg of total cementitious material.

BUILDMIX PC 200

High performance PCE based admixture for wide range of concrete grades.

Typical Uses:

BUILDMIX PC 200 is a high-performance retarding super plasticizers intended for applications where retardation and long workability retention are required.

Dosage:

0.3 to 2 percent by weight of total cementitious material.

BUILDMIX PC 300

Advanced low viscosity retarding super plasticizer, based on poly carboxylic technology.

Typical Uses:

Intended for applications where retardation and long workability retention are required. For use in: Mass raft foundation, Pumped concrete, Concrete requiring long workability retention, High performance concrete.

Dosage:

0.5 to 3.0 liters/100 kg of total cementitious material.

BUILDMIX PC 400

Advanced low viscosity high performance super plasticizer, based on poly carboxylic technology. Complies with IS:9103-1999(2007) and ASTM C494 Type G.

Typical Uses:

Intended for applications where high-water reduction and long workability retention are required. For use in: Self-compacting concrete, Pumped concrete, Concrete requiring long workability retention.

Dosage:

0.4 to 2 percent by weight of total cementitious material.

BUILDMIX PC 500

High range water reducing admixture based on poly carboxylic technology. Combines the properties of water reduction and workability retention.

Typical Uses:

Used where high-water reduction & long workability retention is required in SCC, pumped concrete, High performance concrete.

Dosage:

0.5-2 liters per 100 kg of cementitious material.

BUILDCAST 50

Concrete admixture for precast concrete elements to obtain high early compressive strength. Complies to IS: 9103:1999 and ASTM C494 Type F.

Typical Uses:

Precast concrete such as Electric poles, precast manholes, cement tiles, precast gutters, kerb stones, building blocks etc.

Dosage:

0.2-2 liters/100 kg of total cementitious material.

BUILDCAST 100

Advanced low viscosity super plasticiser, based on poly carboxylic technology for concrete precast industries.

Typical Uses:

High performance precast super plasticiser intended for applications where reduction in cycle time and early strength are required.

Dosage:

0.5 to 3 percent by weight of total cementitious material.

BUILDMIX NC

Chloride free accelerating admixture, complies with IS:9103-99, BS 5075 Part 1 and ASTM C494 Type C.

Typical Uses:

To accelerate the setting and early strength gain of portland cement concrete and mortar. Typical application includes precast concrete sections, concrete placed in cold weather conditions and concrete repairs etc.

Dosage:

2-3 liters/100 kg of total cementitious material.

BUILDCON CWP-ADMIX

Integral waterproofing admixture based on crystalline formation to produce water tight concrete.

Typical Uses:

An integral waterproofing admixture to produce water tight concrete. The active chemical in BUILDCON BOND-CWP react with moisture available in concrete to produce non soluble crystal formation throughout the pores... Developed to use in all types of concrete foundation below ground, water reservoir, tunnel concreting, retaining walls and subways, water tank and swimming pools & precast unit.

Dosage:

1 to 2% by weight of total cementitious material.

BUILDMIX LW+

Integral waterproofing liquid admixture for concrete and mortar. Conforms to IS 2645-2003 & IS 9103-1999.

Typical Uses:

Increases the waterproofing properties of concrete and cement sand mortars for critical applications like roof slabs and screeds, basements, external plastering, bathroom floors, water tanks, sumps, drains etc.

Dosage:

125 ml/bag of total cementitious material.

BUILDMIX PUMP PRIMER

A unique compound of high-performance components, which offers superlative cost reductions by saving time and protecting pump and pipe line.

Typical Uses:

• Superior concrete pump capacity.
• Reduces pressure in pumps & pipes.
• Fast & easy preparation of the primer slurry.
• Minimum wear and abrasion of pipes.
• The risk of stop & block is reduced virtually for nil.
• Outstanding time saving and enhanced transport efficiency.

Dosage:

Refer Datasheet.

BUILDCONCURE WB

Low viscosity wax emulsion, water based concrete curing compound. Complies to ASTM C 309-90.

Typical Uses:

For spraying on freshly cast concrete, or newly exposed concrete surfaces after removal of form work, to form a temporary membrane which will retain sufficient moisture for effective curing to take place.

Coverage:

3-5 m²/litre

BUILDCONCURE AC

Eco-friendly, acrylic resin based, clear curing compound, sealer and dust proofer. Complies to ASTM C1315 Type 1, class A.

Typical Uses:

Provides a clear curing, sealing and dust proofing compound. High rise construction, Floors, warehouses, slabs and columns, Self-curing, primer system to subsequent coverings.

Coverage:

5-7 m²/litre

BUILDCONCURE AL

Supreme quality membrane-forming, ready to use, aluminized resin-based curing compound for application on fresh concrete, mortar and other cement coverings.

Typical Uses:

Protection of elements with high surface/volume ratio: Slabs, roads, concrete highway. Protection of concrete/mortar subject to adverse drying effects. Trowel finishing. Precast Concrete.

Coverage:

5-7 m²/litre

BUILDFINISH MB

Stain free, concrete mould release agent.

Typical Uses:

To provide quick, clean and easy stripping of moulds and form work and ensure high quality fair faced and stain free concrete.

Coverage:

20-60 m²/litre depending on porosity & texture of mould surface.

BUILDFINISH WB

Concentrated and emulsified chemical mould release agent.

Typical Uses:

For easy stain free removal of concrete moulds and form work of all types, particularly where wooden form work is used and de-moulding and stripping times exceed 24 hrs.

Coverage:

1 litre when diluted with 6 liters of water will cover 80-180 m².

BUILDGROUT GP2

Plastic shrinkage compensated, high flow, high strength cementitious grout. Complies to ASTM C 1107 Type A.

Typical Uses:

Machine foundation grout with both Static & dynamic loads, bridge bearings, precast construction etc.

Yield:

13.3 Liters/25 kg bag @ Flowable Consistency.

BUILDEPOXY GROUT

High flow, high early & ultimate strength epoxy grout suitable for grouting thickness up to 75 mm. Complies to ASTM C 1181.

Typical Uses:

Machine base grouting of heavy-duty compressors, rail plates in ballast less track.

Yield:

Refer Datasheet.

BUILDCON FIX-PRG

Polyester resin grout. Complies to BS 4551 BS 5080 & BS 2782.

Typical Uses:

For high strength corrosion resistant anchoring of bolts and bars from 12-50 mm diameter into concrete, rock, masonry or brickwork where high speed of installation and early application of load is required.

Dosage:

Refer Datasheet.

BUILDBEX-100

Plasticised expanding grout admixture. Complies to BS: 8110 Part 1-1985, Section 8.9.4.6.

Typical Uses:

An admixture for cementitious grouts where a reduced water/cement ratio and positive expansions are required. Applications include bed grouting, duct grouting, non-shrink infilling and jointing.

Dosage:

Refer Datasheet.

BUILDCON REPAIR MORTAR-MS

Single component, fibre reinforced shrinkage compensated, polymer modified structural grade repair mortar (M 45 grade).

Typical Uses:

Suitable for wet spraying and hand application. Particularly well suited to vertical and overhead repairs. Typical applications include repairs to irregular profiles and any structural concrete members.

Yield:

Approximately 13.5 liters per 25 kg bags.

BUILDCON REPAIR MORTAR-HS

Single component, fibre reinforced, high strength, shrinkage compensated, polymer modified structural grade repair mortar (M 80 grade).

Typical Uses:

Suitable for hand and spray application for repairs where high load bearing is required. Vertical and overhead repairs, General concrete and masonry repairs, Voids greater than 10 mm deep, Repairs to honeycombing.

Yield:

13.4 liters per 25 kg bags.

BUILDCON MICRO CONCRETE

Shrinkage compensated, free flow, structural grade micro concrete for concrete repairs and strengthening (M 50 grade).

Typical Uses:

For repair to damaged reinforced concrete elements particularly where access is restricted and where vibration of the placed material is difficult or impossible. Suitable for various structural strengthening measures such as encasements build-ups etc.

Yield:

13 litres/25 Kg @ W/P 0.16

BUILD EPOXY MORTAR-HS

High strength, high performance epoxy resin-based repair mortar (60 MPA).

Typical Uses:

Repair of concrete, masonry, etc., damaged due to chemical attack and for repairing areas subject to tensile loads.

Coverage:

2 m² at 5mm thickness/pack

BUILD EPOXY MORTAR-MS

Epoxy resin-based repair mortar (40 MPA).

Typical Uses:

For lining ETP, STP and chemical tanks along with suitable protective coating and for repairing dams (pointing) spillways etc. where abrasion resistance is required with high strength.

Coverage:

2.67 m² at 3mm thickness

BUILDTOP-FH

Non-metallic, dry shake on floor hardeners.

Typical Uses:

Ideally suited for all industrial and commercial floors subjected to the heavy abrasion / wear suitable for flooring applications in heavy engineering industry, warehouses & car parking.

Application rate (kg/m²):

• Heavy Duty: 7.0
• Medium Duty: 5.0
• Light Duty: 3.0

BUILDTOPLFH-

High performance, liquid floor hardener & densifier.

Typical Uses:

For surface hardening of new and old concrete to prevent dust generation and to reduce permeability. Typical areas of application include warehouses, factories, platforms on both new and existing concrete surface where epoxies are not desirable.

Coverage:

10-12 m²/litre

BUILDCON PS 43 GG / PG

Two-part polysulphide sealant.

Typical Uses:

Particularly recommended for sealing structural expansion joints in most civil engineering structures like building superstructures, subways, basements, floors and reservoirs.

Dosage:

Refer datasheet. Dependent on joint size.

BUILDSEAL PU600

One part, PU based building & expansion joint sealant.

Typical Uses:

Suitable for sealing joints in concrete, brickwork, block work, precast panels, stone cladding, perimeter sealing around doors and windows, and non-trafficked floor joints.

Dosage:

Refer datasheet.

BUILD BRUSHBOND

Two component acrylic modified cementitious coating for concrete and masonry surface.

Typical Uses:

Provides seamless, flexible, waterproof coating suitable for use in water tanks, sunken slabs, sumps, roofs, basements to ensure water tightness.

Coverage:

Industrial pack (23kg Powder + 4L Polymer): 16-18 m² @ 1 mm thickness.

BUILD BRUSHBOND RFX

Elastomeric polymer modified cementitious waterproof coating.

Typical Uses:

Used for waterproofing of existing and new structure. Also suitable for all types of structures including those situated in coastal environment-Roof, basements, water tanks etc.

Coverage:

Industrial pack (15kg powder + 5.088kg liquid): 12-14 m² in two coats to achieve 1mm thickness.

BUILD BRUSHBOND ROOFGUARD

High build fibre-reinforced acrylic waterproofing coating for roofs.

Typical Uses:

Can be applied directly on existing concrete, brickbat coba, and screed. Provides a seamless, tough durable water-resistant coating which can withstand light pedestrian traffic and has excellent weather resistance.

Coverage:

0.5 liter/m²/coat

BUILDTOPCRETE

Acrylic Polymer for concrete & masonry.

Typical Uses:

Polymer in conjunction with cement provides a seamless waterproof coating to concrete and masonry surfaces.

Coverage:

Refer datasheet.

BUILDPROOF XTRA

Single component polymer for cement-based waterproofing.

Typical Uses:

Polymer in conjunction with cement provides a seamless waterproof coating to concrete and masonry surfaces.

Coverage:

4.5 to 5.0 m²/L/ coat

BUILDBOND CWP (COAT)

Crystalline capillary waterproofing system for cementitious substrates.

Typical Uses:

For waterproofing against the positive or negative sides of hydrostatic heads of water, for damp roofing, repairing cracks, plugging holes, sealing wall-floor joints and stopping active leaks.

Dosage:

1.0 to 2.0 kg/m² per application (brush)

BUILDPROOF BIT100

Bituminous waterproofing coating.

Typical Uses:

External coating for below ground structures such as cellars waterproofing, protection of concrete against ground water ingress.

Coverage:

4-6 m²/litre

BUILDPROOF PU (COAT)

Liquid applied elastomeric single component pitch free waterproofing membrane.

Typical Uses:

Application area such as roofs, podiums, balconies, small planters, bridge decks.

Dosage:

2.0 kg/m² @ 1.5 mm

BUILDCON SBA

Thixotropic epоху adhesive for precast segments.

Typical Uses:

Bonding precast concrete segments to speed up construction and provide structural and water resistant joint e.g. flyovers, bridges, pipelines etc.

Coverage:

1.63 m²/pack @ 2 mm thickness

BUILDCON 2EP-CL

Solvent free epoxy bonding agent for joining old and new concrete.

Typical Uses:

For bonding new cementitious materials to existing cementitious surfaces. Ideal for extensions and repairs structural concrete in industrial, residential and commercial buildings.

Coverage:

2.6 m²/litre

BUILDCON EP STD

Two component epoxy bonding agents supplied in pre-weighed quantities for ready on-site mixing and use.

Typical Uses:

Bonding old and new cementitious substrates.

Coverage:

2-2.5 m²/litre

BUILDCON AR STD

Acrylic emulsion cement modifier and concrete bonding agent.

Typical Uses:

Useful as polymer modified mortars and screeds for reinstatement of worn out / damaged concrete. Also added to the concrete for improving the impermeability and enhancing waterproofing.

Coverage:

Approximately 6-8 m²/litre

BUILDCON SBR LATEX STD

Latex acrylic polymer-based cement modifier cum bonding aid with waterproofing property.

Typical Uses:

For modifying and improving bonding of floor toppings, renderings and mortars; repair of worn, damaged and spalled concrete, repair of large cracks, polymer modified floor screeds, waterproof plasters.

Coverage:

Approximately 4-5 m²/litre depending on substrate porosity.

BUILDMIX SHOT LAF-1400

Available in liquid form. Used as an accelerating admixture for sprayed cementitious mixes. Free from Sodium & Potassium salts (caustic alkali free).

Typical Uses:

Suitable for application as an alkali free accelerator for wet process of spraying. Main applications: Rock and slope safety, Temporary and permanent rock support in tunnels, In poor ground conditions, High volume sprayed concrete.

Dosage:

Refer Datasheet.

BUILDMIX SHOT PAF

Possesses a strong ability to accelerate the setting time of concrete and cement-based mortar. It is most often used for producing dry process shotcrete.

Typical Uses:

Ensures to stabilize the loose rock during excavation of tunnels, galleries, retaining walls, embankment and tank linings etc. BUILDMIXSHOT – PAF admixed mortar/concrete sets very quickly.

Dosage:

Refer Datasheet.

BUILDMIX SHOT-L

Filtered sodium silicate based liquid accelerator for fast-setting shotcrete.

Typical Uses:

Securing surfaces during tunnelling, mine passages, shafts, dams, etc. Levelling layers and finishing of sprayed shotcrete lining. Non confining structural linings. Consolidation of rocks, cliff-faces and slopes.

Dosage:

Refer Datasheet.

BUILD ROCKFIX-R

Based on specially selected thixotropic polyester resin and catalyst components in a single pack cartridge/capsule form. Available in two grades, viz. fast and slow.

Typical Uses:

Inserted into the anchor hole and gets ruptured with the rotation of the bolt. The catalyzed resin spreads around the anchor bolt and grouts the annular space. Chemical reaction results into high strength solid anchor.

Dosage:

Refer Datasheet.

BUILD ROCKFIX-C

A cementitious anchor product supplied as a ready-to-use dry powder encapsulated in a perforated skin. Fast setting version is also available.

Typical Uses:

For fixing of rock-bolts/anchor bolts/wooden dowels with full column grout for strata-control in tunneling and mining to minimize roof falls.

Dosage:

Refer Datasheet.

BUILD MICRO SILICA

Dry fine particles of silica fume, in a compacted dry powder form of mineral origin. Fills up minute voids in the cement-sand matrix. It is also a supplementary cementitious binder. Conforms to ASTMC – 1240.

Typical Uses:

Used in production of high grade, high strength concrete. Makes concrete impervious and enhances durability. Used for construction of basements, railway platforms, marine structures, bridges, dams, tunnels, water-retaining walls, PSC girders, etc.

Dosage:

Refer Datasheet.